MILF-05 Spear Point Utility Folder by HARDCORE HARDWARE

For its unparalleled strength, durability and edge holding capabilities; we’ve used premium grade CPM S35VN steel for the blade. The contours are expertly hollow ground and the profile is equally up to task performing hard cutting chores to those more intricate duties.
The MILF-05 comes pre set with a firm action that can be adjusted for speed via the Torx head pivot point. The polished frame lock up and mechanics are positive and crisp when opening and relocating home.
3D textured G10 scales and frame facilitate a sure grip in the hand and pocket. Handling is aided by non-slip jimping in key points at both front and back. The handle also features a stainless liner and spacers.
We have included with this series the added convenience of a robust stainless, pocket clip that can be located in 1 of 4, left or right hand, tip up or tip down positions to suit your personal carry preference.
The MILF-05 is a non-prohibited design; however please check your local State laws in relation to knife ownership and carry.
TOOL SPEC
Code: MILF-05 Spear Point
Type: Knife (Folding Knife)
Lock: Frame Lock
Blade Steel: CPM S35VN
Blade Thickness: 5 mm (0.19”)
Blade HRC: 59 - 60
Frame Steel: 420 Stainless
Liner: 420 Stainless
Washers: Phosphor Bronze
Back Spacer: 420 Stainless
Handle Scales: G10
Thumb Stud: Stainless - Adjustable
Pocket Clip: 420 Stainless - 4 Point
Pivot Screw: T10 Torx
Grip Screws: T6 Torx
Blade Length: 90 mm (3.54")
Blade Width: 30 mm (1.18”)
OAL (Open): 210 mm (8.26")
OAL (Closed): 123 mm (4.84")
Blade Width: 30 mm (1.18")
OAW (Open): 35 mm (1.37")
OAW (Closed): 40 mm (1.57")
OAD:* 14 mm (0.55”)
Weight: 208 g (7.34 oz)